|
|
|
|
|
|
> > > |
|
|
Split-Core Current Transformer
|
 |
Feature:
Split-core type with clip-on design, easy installation at set-up devices
1~4V AC voltage output
Built-in circuit protection from burn out even secondary circuit open
Compact size works up to 80A AC RMS
Cost-effective solution
Two ends hook attached to secure primary conductor with cable-ties
Applicable for power saving facilities and overload protection systems
Isolated plastic case recognized according to UL 94-V0
Specifications:
| Rated primary current |
10mA ~ 80A RMS (50/60Hz), RL≤10Ω |
| Accuracy |
Class 1.0, RL≤100Ω |
| Overload Capability |
120A RMS continuous |
| Sensing aperture |
Ø 10 |
| Output features |
refer to EDM |
| Coil of secondary circuit |
3000 ± 2 turns (with protection up to 10.2V max.) |
| Coil impedance of secondary circuit |
350£[±2Ω (at 25°C) |
| Enclosure Material |
ABS Flame Retardant (UL-94V0) |
| Output conductor length |
Typical 150 mm (also available with customer's request) |
| Dielectric strength |
1000V AC / 1min between sensor core and output |
| Insulation resistance |
> 100MΩ at 500V DC between sensor core and output |
| Weight |
approx. 40 g |
| Operating |
-20 ~50°C, below 80% R.H. no condensation |
| Storage |
-30 ~90°C, below 70%R.H. no condensation |
Dimension:
 |
|
|
|
| |
|
|
|
